Equipment parameters:
1. Mechanical part
Cutting steel pipe material: hot-rolled and cold-rolled low carbon steel Q235, Q195
Product range: round tube, square tube, rectangular tube:
The mobile car is equipped with a guide roller in front of the saw blade, and a supporting roller behind the fixture; Adopting imported linear guide rails, equipped with small car safety buffers on both sides, the fixture adopts pneumatic or hydraulic clamping mechanisms: using 2 sets of clamping devices; The inlet end is tapered to prevent scratching of the steel pipe; Equipped with adjustable cooling spray pipeline to flush impurities and iron filings on saw blades and clamping blocks; Sawing method: divided into 5 sections, with changes in speed and feed rate; All pipelines in the mechanical equipment meet the following requirements: the tank drag chain is wide enough to ensure sufficient internal space; There are multiple isolation strips inside the tank drag chain, separating oil pipes, line pipes, water pipes, etc;
2. Electronic control system:
We use well-known brand control systems and electrical components, with one operating console and one control cabinet. The control cabinet is equipped with a warning light as a fault alarm. The LCD touch screen displays operating parameters and can store 16 sets of specification data; Able to easily set the cutting length of welded pipes according to the product. Reserve interlocking and interlock protection interfaces with the host. The equipment has both manual and automatic functions, and its actions and status should be indicated accordingly. The system is stable and reliable, with complete protection and safety functions.
Cold saw parameters
A,Cutting saws models:Ø20
Cutting range:Ø12- Ø 25
Speed:100m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
B,Cutting saws models:Ø32
Cutting range:Ø15- Ø 50
Speed:100m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
C,Cutting saws models:Ø50
Cutting range:Ø20- Ø 65
Speed:100m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
D,Cutting saws models:Ø60
Cutting range:Ø25- Ø 76
Speed:80m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
E,Cutting saws models:Ø76
Cutting range:Ø32- Ø 89
Speed:70m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
F,Cutting saws models:Ø89
Cutting range:Ø38- Ø 100
Speed:60m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
G,Cutting saws models:Ø114
Cutting range:Ø60-1 Ø 20
Speed:40m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Clamping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2
H,Cutting saws models:Ø127
Cutting range:Ø65- Ø 140
Speed:40m/min
Material: plain carbon steel
Cutting length:1500mm-12000mm
Cla mping method: start/hydraulic
Fixed length tolerance: 1.0 ±
Cut burr: ≤ 0.2